Selected delivery country: Austria

Complete PV substructure for pitched, flat and metal roofs

How many storms and snowy winters a solar power system can withstand without damage depends largely on the PV substructure beneath the modules. PV-24 offers around 170 individual parts and sets for this purpose, from mounting rails and roof hooks to flange nuts. This allows you to assemble your system precisely according to the dimensions of your roof , instead of adapting a standard package.

The majority of the rails, clamps, and hooks are from K2 Systems . Metal roofing panels from Marzari, available in over 20 versions, prepare clay, concrete, and slate roofs for the PV substructure. At each hook point, they replace the tile or slate with a coated steel sheet featuring a foam wedge to prevent breakage and water ingress. An adjustable mounting kit from KSENG covers walls, garage roofs, and other special surfaces.

Load-bearing components of our photovoltaic substructures are made of aluminum, while screws and most roof hooks are made of A2 stainless steel. Both materials are corrosion-resistant and can withstand the temperature fluctuations of a Tyrolean winter. The type of PV substructure your roof requires depends first on the roof covering , followed by the number and size of the modules.

Start » Shop » substructure

Filter by manufacturer / brand:

Subcategories:

Matthias Schiestl Photovoltaics Solar Pv 24 At Cta
Personal advice on solar & photovoltaics as well as other devices for home, garden, car

Matthias Schiestl and his team are always happy to help you reliably and quickly with any questions you may have and how you can use the devices reliably and efficiently in your everyday life. » Learn more about us

Pv 24 substructure photovoltaic solar systems cells panels

We carry components for substructures from the manufacturers K2 Systems, SL-Rack, Aerocompact, Marzari and Otto Lehmann.

With the following tool from K2 you can easily calculate your personal substructure:

K2's online tool –>( Click here)<– allows you to plan your own assembly materials . (Simply register; this is also possible for private individuals, they only need to provide a company name. The existence of this company is not verified.)

Afterwards, simply send us the parts list by email to info@pv-24.at and we will gladly prepare a corresponding offer for you based on this.

Request PV solar substructure:

    Photos & files (max. 5 files as image, PDF up to 4 MB each):





    Elevated PV substructure for the flat roof

    If a module lies flat, rainwater mixed with dust and leaves collects on the glass, and the low winter sun hits it at an unfavorable angle. A raised PV mounting system lifts the modules to 10° or 15° and orients the rows towards the south. What holds the frame in place? Usually, it's ballast stones rather than screws. Which PV mounting system a flat roof and waterproofing can support therefore depends on the weight of this ballast and the building's load-bearing capacity. We also supply all components for the mounting system individually.

    • PV mounting system for flat roofs, inclined to the south: front support elements and ridge sections for 10° inclination, plus mid and end clamps for module frames from 30 to 50 mm.
    • Wind deflectors: They close off the back of each row, thus reducing wind pressure and saving ballast.
    • Support pads and load distributors: Rubber pads protect foil, bitumen and gravel fill from pressure marks.

    Would you prefer to order modules, hybrid inverters and mounting system as a package? Complete 10 kWp PV systems for flat roofs with a 10° tilt angle are available.

    Sheet metal seam clamps and threaded rods for metal and fiber cement roofs

    But what if there are no tiles on the roof at all? Metal roofs and corrugated sheets require a PV mounting system that attaches directly to the roof covering, because a roof hook cannot find purchase under the covering there.

    On standing seam roofs, a sheet metal seam clamp is attached to the side of the upright seam and screwed in place. No holes are drilled through the metal. It fits both round and flat seam profiles and is made of aluminum with stainless steel screws. The Rib-Roof Speed ​​500 profile comes with its own Zambelli clamp with a 17 mm opening width, which arrives pre-assembled.

    Where corrugated fiber cement or corrugated metal roofs cover barns, stables, and halls, the threaded rod is used. With an M10 thread and a length of 180 or 250 mm, it extends through the corrugation and into the wooden purlin. An adapter then connects its head to the mounting rail. However, corrugated sheets from the period before the asbestos ban in the early 1990s may contain asbestos. Therefore, before a PV substructure is installed on such a roof, a specialist company should inspect the sheets.

    The required height of the rails above the shaft depends on the profile. Send us a photo and the profile dimensions, and we will match them with the appropriate clamps and adapters.

    Mounting kit or individual parts as substructure for the PV system

    For a standard roof with 2 to 12 modules, a complete PV mounting kit is often the faster option, as the rails, hooks, and clamps are already tailored to the number of modules. Individual components are more cost-effective when a roof deviates from the norm. Typical examples include dormers and chimneys, tile roofs, or roofs with more than 12 modules. On such roofs, it's best to plan the PV substructure section by section, between each obstacle.

    Assembling the components individually gives you more flexibility with rail length and hook spacing. Properly planned, the substructure keeps the PV system and roof membrane at a distance, allowing air to circulate beneath the modules. Crystalline modules lose approximately 0,3 to 0,4% of their power output for every degree Celsius of cell temperature , so good ventilation directly translates into increased yields in the summer.

    In addition, there are details not included in any standard kit: leveling plates for uneven battens, beaver tail hooks with a 15 cm wide tab, clamps for equipotential bonding between the module frame and rail, and lightning protection clamps. Upon request, we will create a bill of materials for the complete PV substructure from your roof plan, including screws and end caps. The modular system doesn't end at the roof edge. With our individual components, you can even build a photovoltaic mounting system for the facade, using wall brackets from 80 to 280 mm and mounting rails up to 5,70 m in length.

    Reordering spare parts and extensions for existing solar systems

    Did an end clamp get lost during installation, or do you want to expand the module array by another row? For such cases, every component is available individually, with body washers starting at just 6 cents each. Before purchasing replacements, it's worth checking the rail profile of your existing PV mounting system, as connectors and end caps vary depending on the system. If a module is to be fitted with its own microinverter later , a small mounting plate attaches the device directly to the rail without the need for additional drilling.

    We also carry suitable PV mounting systems for small balcony installations. You can choose between a mounting kit with a 0° or 15 to 30° tilt, as well as railing brackets from Anker SOLIX for two modules. Simply provide us with the type designation of your existing rail, and we will find the compatible counterpart. This ensures that the PV substructure remains seamless even after expansion. Electricians and solar installers with ongoing projects can request B2B pricing.